Powder coating service providers are usually asked many questions regarding the process by clients who need to make a decision regarding which finishing approach to work with. Most of the questions asked revolve around the benefits that powder coatings offer over liquid paints and other finishing methods. To understand what this process is all about, one has to start by understanding its definition. When one needs Powder Coating Surrey BC Offers the perfect location to visit.
The process of applying a protective and decorative finish to almost any metal surface is known as powder coating. The process utilizes a powdery coating made from finely ground colorants and resin. A sprayer is then used to dust the coating onto the surface being worked on. As the coating comes out of the sprayer, the particles are electrostatically charged. For the process to be effective the substrate must be electrically grounded.
After dusting the substrate with the coating, it is placed inside an oven for the curing process to take place. The curing process heats and combines the powder to form a smooth coating on the substrate. The resulting finish is of high quality, durable, smooth, uniform, and attractive. In North America, this process is the fastest growing finish technology.
This method has been in existence for a long time, it was established in 1950s but until 1980s was when the method begun being used and explored. It was during this period that the method gained mainstream popularity. The method was originally reserved for mass production and heavy industrial processes and use. On the other hand, with increased popularity home owners, hobbyists and enthusiasts can now access the process.
It is through thit method that businesses, industries, and consumers are able to have a durable, economically friendly and attractive finishing. Any form of metallic surface can be applied with the powders. These powders provide resistance to forces of wear and tear. There are diverse colors for consumers to choose from. Some of the various choices of finishes for consumer are satin, flat, metallic, clear, candies, gloss, iridescent, high gloss, fluorescent, wrinkle, hammer tone, and glitter finishes.
Solvent-based paints are cause a lot of pollution to the environment because they contain volatile organic compounds. These VOCs are emitted into the environment to cause a lot of air pollution. Since coatings do no contain solvents, they lack VOCs and so they do not cause pollution in the environment. This environmental friendliness makes this method very preferable.
Cost effectiveness is another major advantage that is associated with this method. Cost savings are achieved from this method because it is possible to buy powder that is just enough for the surface that needs to be painted with no excesses. Also, there is no need for catalysts and hardeners needed in this process. Surface preparation simply involves sandblasting and cleaning, which cuts down on cost further.
Non metal surfaces can also be coated through this method. The process is however a little different from the method used for coating metallic surfaces. The non-metallic object commonly needs to be put in an oven and get heated. The surface is then sprayed with powder while it is still hot for the powder to melt slightly on contact with the surface. The last step is to return the object into the oven to undergo complete curing.
The process of applying a protective and decorative finish to almost any metal surface is known as powder coating. The process utilizes a powdery coating made from finely ground colorants and resin. A sprayer is then used to dust the coating onto the surface being worked on. As the coating comes out of the sprayer, the particles are electrostatically charged. For the process to be effective the substrate must be electrically grounded.
After dusting the substrate with the coating, it is placed inside an oven for the curing process to take place. The curing process heats and combines the powder to form a smooth coating on the substrate. The resulting finish is of high quality, durable, smooth, uniform, and attractive. In North America, this process is the fastest growing finish technology.
This method has been in existence for a long time, it was established in 1950s but until 1980s was when the method begun being used and explored. It was during this period that the method gained mainstream popularity. The method was originally reserved for mass production and heavy industrial processes and use. On the other hand, with increased popularity home owners, hobbyists and enthusiasts can now access the process.
It is through thit method that businesses, industries, and consumers are able to have a durable, economically friendly and attractive finishing. Any form of metallic surface can be applied with the powders. These powders provide resistance to forces of wear and tear. There are diverse colors for consumers to choose from. Some of the various choices of finishes for consumer are satin, flat, metallic, clear, candies, gloss, iridescent, high gloss, fluorescent, wrinkle, hammer tone, and glitter finishes.
Solvent-based paints are cause a lot of pollution to the environment because they contain volatile organic compounds. These VOCs are emitted into the environment to cause a lot of air pollution. Since coatings do no contain solvents, they lack VOCs and so they do not cause pollution in the environment. This environmental friendliness makes this method very preferable.
Cost effectiveness is another major advantage that is associated with this method. Cost savings are achieved from this method because it is possible to buy powder that is just enough for the surface that needs to be painted with no excesses. Also, there is no need for catalysts and hardeners needed in this process. Surface preparation simply involves sandblasting and cleaning, which cuts down on cost further.
Non metal surfaces can also be coated through this method. The process is however a little different from the method used for coating metallic surfaces. The non-metallic object commonly needs to be put in an oven and get heated. The surface is then sprayed with powder while it is still hot for the powder to melt slightly on contact with the surface. The last step is to return the object into the oven to undergo complete curing.
About the Author:
When you are looking for information about powder coating Surrey BC residents can come to our web pages today. More details are available at http://www.davescoating.com now.
No comments:
Post a Comment