Street rods are special kinds of go karts designed to achieve maximum linear speed. This idea originated from the streets of America. Right now, the concept has spread to various parts of the world. These karts are usually made from light and easily modified vehicles like the roadster. The fact that roadsters are also inexpensive makes them a perfect choice. One does not need a professional to put a street rod chassis together. The person will simply need some background knowledge and skills in car build up and repair.
The person will have to begin by procuring an old car. One does not have to waste a good car for this activity. One should simply walk into a local junkyard and check out for old but intact vehicles. The person can also decide to use the Rodding websites to locate a car that might be useful for this procedure. Avoid the rusted or shapeless vehicles, as they will do you no good. Examples of car models that can be used for this activity include Chevrolet trucks, Chryslers and Ford vehicles as well.
For one to be able to get the desired strength and stability, the operator will have to strip this car down to the last piece. Hot rod construction works begin from scratch. You will have to remove all the fixtures, seats and other components as well. Being an old car, it will be in a dilapidated shape anyway. Therefore, the removal of parts will be inevitable. While at this, make appoint to drain the gas tank of any gasoline.
Determine the size of frame that will be required for your project. Measure and take mark of the points where you would want the axles and wheels to fit. Use a reciprocating saw to cut the various measurements as desired. Many people prefer a shorter posterior end for an enhanced look. Parts such as the hoods and roof should be gotten rid of since they will not be of use.
For a person that wants to make a customized frame, steel tubes should be used. This is usually a lot tougher since one will have to cut, shape and weld these rectangular tubes as to come up with a suitable frame. Creativity and resourcefulness will save one from much spending while carrying out this venture.
Starting this vehicle from the frame upwards is the best way forward. The other components that have to be installed include the axles, shocks and suspension systems among other things. One can treat a hybrid suspension system by blending recent suspension technology with the old parts. Measure all dimensions of the frame to make fitting other components easier and accurate.
There are no rules governing rat rod construction, the person can therefore be as creative as one pleases. Many people rush for that new engine as to give their device optimum performance capabilities. However, an old engine will work just as fine. Just make sure to rebuild it into good shape.
Once the engine is in shape, your rod is almost ready to run. For the safety of whoever will be driving this device, be sure to install brakes and tires. This rod must have a seat as well. One can cut up a couch for this purpose. For a sense of style, install a windshield, rear and side view mirrors. In addition to that, paint the body too.
The person will have to begin by procuring an old car. One does not have to waste a good car for this activity. One should simply walk into a local junkyard and check out for old but intact vehicles. The person can also decide to use the Rodding websites to locate a car that might be useful for this procedure. Avoid the rusted or shapeless vehicles, as they will do you no good. Examples of car models that can be used for this activity include Chevrolet trucks, Chryslers and Ford vehicles as well.
For one to be able to get the desired strength and stability, the operator will have to strip this car down to the last piece. Hot rod construction works begin from scratch. You will have to remove all the fixtures, seats and other components as well. Being an old car, it will be in a dilapidated shape anyway. Therefore, the removal of parts will be inevitable. While at this, make appoint to drain the gas tank of any gasoline.
Determine the size of frame that will be required for your project. Measure and take mark of the points where you would want the axles and wheels to fit. Use a reciprocating saw to cut the various measurements as desired. Many people prefer a shorter posterior end for an enhanced look. Parts such as the hoods and roof should be gotten rid of since they will not be of use.
For a person that wants to make a customized frame, steel tubes should be used. This is usually a lot tougher since one will have to cut, shape and weld these rectangular tubes as to come up with a suitable frame. Creativity and resourcefulness will save one from much spending while carrying out this venture.
Starting this vehicle from the frame upwards is the best way forward. The other components that have to be installed include the axles, shocks and suspension systems among other things. One can treat a hybrid suspension system by blending recent suspension technology with the old parts. Measure all dimensions of the frame to make fitting other components easier and accurate.
There are no rules governing rat rod construction, the person can therefore be as creative as one pleases. Many people rush for that new engine as to give their device optimum performance capabilities. However, an old engine will work just as fine. Just make sure to rebuild it into good shape.
Once the engine is in shape, your rod is almost ready to run. For the safety of whoever will be driving this device, be sure to install brakes and tires. This rod must have a seat as well. One can cut up a couch for this purpose. For a sense of style, install a windshield, rear and side view mirrors. In addition to that, paint the body too.
About the Author:
If you are looking for the facts about a street rod chassis, come to our web pages here today. Additional details are available at http://www.hotshoehotrods.com now.
No comments:
Post a Comment